F1 (EA SPORTS F1 Series)

This page covers the F1 series (F1 23 / F1 24 / F1 25) with RaceLab. The setup is the same across versions: use Windowed (Fullscreen) so overlays can draw on top, and enable UDP Telemetry with the correct UDP Format for your game version.

✅ Windowed (Fullscreen) ✅ UDP Telemetry ✅ Correct UDP Format per year ✅ RaceLab “Configure” option ✅ Quick fixes

Fast Setup Display Settings Telemetry (UDP) F1 23 F1 24 F1 25 Quick Fixes Next

RaceLab Support – F1 (F1 23 / F1 24 / F1 25)

Fast setup (recommended): RaceLab app → Settings → Game Setup → click Configure for F1. Then restart the game once after changes. [1]

F1 25 note: F1 telemetry formats can change across yearly titles and patches. If you’re unsure what RaceLab currently supports for F1 25, check the latest RaceLab release notes before changing formats. [3]

Step 1: In-Game Display Settings (Overlays Must Be Able to Draw On Top)

RaceLab’s official guide recommends running F1 in Windowed (Fullscreen) so overlays can render on top. Restart the game after changing display mode. [1]

Open Options.
Go to Settings → Graphic Settings → Video Mode.
Set Display Mode to Windowed (Fullscreen).
Restart the game after changing this setting. [1]

Step 2: Enable Telemetry (UDP)

In the official RaceLab guide, set UDP Rate to 60Hz, and choose the correct UDP Format for your title. Restart the game after changing telemetry settings. [1]

Open Game Options.
Go to Settings → Telemetry Settings.
Set UDP Rate to 60Hz. [1]
Set UDP Format using the correct block below for your game version.
Restart the game after changing telemetry settings (important).

F1 23 Recommended UDP Format

RaceLab’s official guide states: for F1 2023, set UDP Format to 2022. [1]

F1 23 → Telemetry Settings → UDP Format = 2022

F1 24 UDP 2022 / 2023

RaceLab release notes for F1 2024 support state you must use UDP 2022 or UDP 2023 in-game. Start with 2023; if you get no data, step down to 2022 and restart the game after changes. [2]

Try first

F1 24 → UDP Format = 2023

If no data

F1 24 → UDP Format = 2022

F1 25 What to set

Start with the newest UDP Format offered by your F1 25 Telemetry Settings (if your game lists 2025, start there), then restart the game. If RaceLab shows No data, check the latest RaceLab release notes for the currently supported format and adjust again. [1][3]

F1 25 → Telemetry Settings → UDP Format = (newest available)

Quick Fixes

Overlays not visible

Confirm Display Mode = Windowed (Fullscreen). [1]
Restart the game after changing display mode. [1]

No data in RaceLab

Re-check UDP Rate = 60Hz. [1]
Re-check UDP Format is correct for your game version (see F1 23 / 24 / 25 blocks above).
Restart the game after telemetry changes (required).

Overlays & Layouts Telemetry & Ports Troubleshooting

Where to go next:

Back to Supported Sims Fix a Problem

Unofficial RaceLab support site maintained by Scottozy. Information is provided in good faith based on official documentation and community experience and may change as RaceLab is updated.

This page is an unofficial summary created by RaceLab community member Scottozy, based on personal testing, community reports, and the public sources listed below.

Sources & references (unofficial summary)

RaceLab: RaceLab Garage – F1 setup guide ↩ back

RaceLab: RaceLab release notes – F1 24 support (UDP 2022 / 2023) ↩ back

RaceLab: RaceLab release notes (latest) ↩ back